5000W DC 48V UL1741 Pure Sine Wave Solar Inverter,100A MPPT Solar Charger and 40A AC Battery Charger, 120V AC Output Solar Inverter Charger Manufactured by SunGoldPowerCo.,Ltd (Support Parallel)

SUNGOLDPOWER is a renewable energy company that is focused on designing & manufacturing inverter charger, solar inverter, solar panel and other green energy products. We have been in the inverter field for more than 10 years, and we aim to provide high quality inverters and good service to every customer! If you're trying to build solar system for your RV and off-grid home, we are your best choice !

5000 watt DC 48 volt solar inverter’s conversion time between bypass and inverter is 10ms; Rated input voltage 110/120Vac, Frequency 50Hz/ 60Hz (Auto detection); Efficiency >95%(AC mode), Efficiency >92%(Inverter mode), PV voltage range 120-450Vdc, PV maximum output power 5000W.

Only Solar Charging: The battery will be the only charger source not matter the utility is available or not.

PV Priority: Solar energy will charge battery as first priority. The utility will charge the battery when solar energy is not available.

Utility Priority: The utility will charge the battery preferentially, and the battery will be charged by solar only when the utility is invalid.

Hybrid Charging: The solar energy will charge the battery preferentially,the utility will charge the battery at the same time when the solar energy is insufficient.

• 1. Each inverter should connect to PV modules separately.
• 2. The settings of each inverter should be the consistent.
• 3. The input connection of each inverter should be the same.
• 4. Be sure to connect Current Sharing cable to units which are on the same phase. But please DO NOT connect Current Sharing cable between units on different phases. Otherwise, it may damage the inverters.
• 5. Be sure the length of all battery cables need to be the same, and share the same battery bank.
• 6. Please use the original Parallel Cable and Current Sharing cable. Do not make them by yourself. And Parallel cable and Current Sharing cable can not be parallel with the AC power wires and battery wires, need to cross or interval 1 meter distance between them.

1. This solar inverter is for off grid system. It can be used in parallel.
2. This pure sine wave inverter can only used for 48V solar system.
3. Optional WiFi/GPRS remote monitoring need extra cost.
4. Voltage setting logic:[15]＜[12]＜[04]＜[14]＜[35]＜[37]＜[05]＜[09/11]
5. Maximum PV open circuit voltage 500Vdc, MPPT voltage range 120-450Vdc, Maximum PV inputcurrent 22A, Maximum PV input power 5500W.

About SUNGOLDPOWER

4 Charging Modes

Parallel Support and Wirings

When inverters are used in parallel , it should be noted that:

5000W DC 48V solar inverter's Specification

Notes:

• 【All-in-one solar charge inverter】: SUNGOLDPOWER UL1741 5000W DC 48V Solar Inverter Charger Combined with Max. 100A battery charging (SOLAR+AC), Max 5500W 500V PV Array.
• 【Parallel Kit】: Parallel 6 units up to 30kw power output, you will get 120V single phase,120V/240V Split Phase capable (more than 2 unit in parallel),208V 3-Phase Support (more than 3 unit in parallel), increases the inverter power and surge capacity.
• 【Stable AC output】: Pure Sine Wave Solar Inverter 110V AC output, loaded motor capacity 4HP and overload protected, it can power various household and office loads such as refrigerators, computers, televisions, ovens, air conditioners, etc..
• 【Four charging modes and 4 Output modes】: AC Priority/ Solar Priority/Only Solar /Mains & Solar hybrid charging, 4 output modes: PV priority/utility priority/Inverter priority/Hybrid output and gird connection to meet your different requirements.
• 【Battery type】: SUNGOLDPOWER 5000 Watt DC 48 volt Solar Inverter is compatible with 48V AGM/Sealed, Gel, Flooded, Lithium batteries and a User Mode for custom inputs to work with virtually all battery types. Battery Charging Voltage Range: 40 –60V, RS485 port for BMS communication.